Partner content. Prepared together with the NSOCKS team.
Mobile and residential proxies route requests through different access networks. Available locations, session behaviour and billing vary by provider and plan. Choose based on the result your task needs, then estimate traffic using measured flows rather than a fixed price ratio.
How the two types differ in practice
| Residential | Mobile (4G/5G) | |
|---|---|---|
| Where the IP comes from | Home broadband connections | Mobile carrier networks |
| IP sharing | May be shared, including through ISP carrier-grade NAT | Often shared through carrier-grade NAT |
| Typical price per GB | Lower | Higher |
| Location targeting | Country, often city and ISP | Country and carrier, city coverage varies |
| IP stability in a session | Depends on the provider, pool and session settings | Depends on the carrier, gateway and session settings |
| Best fit | Most web data tasks | Mobile-first platforms, carrier-specific checks |
Mobile exits provide a carrier-network vantage point. They do not reproduce a phone's hardware, browser, operating system or radio conditions. Check those separately with an appropriate device or browser setup. Compare observed results and actual plan prices before choosing either pool.
Choosing by task
- Checking mobile campaign landing pages and redirects in a QA environment. A mobile exit can help test carrier-dependent routing; use an appropriate browser or device for rendering checks. → Mobile where the carrier vantage point is required.
- Monitoring public app-store pages for localized titles, ratings and screenshots. Control country, language and account state. Use a mobile exit only when carrier-specific behaviour is part of the requirement. → Residential first where it meets the task.
- Collecting public business listings and opening hours for 50 cities. City targeting and volume matter more than carrier. → Residential.
- Checking a landing page from a carrier-network exit. A mobile proxy can reveal routing or carrier-specific content differences; it cannot by itself measure a handset's real radio latency or rendering. → Mobile plus device testing where needed.
- Tracking public travel or hotel prices. Control location, locale, cookies, account state and browser configuration; user-agent alone does not guarantee an accurate mobile view. → Residential where controlled measurements meet the requirement.
A simple rule for mixed projects: put every target on residential at first, measure the success rate and data quality, then move only the targets that need carrier-level results to mobile.
Estimating traffic: think in sessions, not pages
For tasks that involve several steps (open a link, follow redirects, load the final page), it is easier to estimate traffic per session than per page.
Monthly traffic (decimal GB) = sessions per day × decimal MB per session × retry factor × days ÷ 1000
How to get each number:
- Sessions per day: how many checks, listings or flows you run.
- MB per session: measure the transferred bytes for complete representative flows, including relevant redirects and resources. Use 1 MB = 1,000,000 bytes and 1 GB = 1,000 MB here. Compare the estimate with the provider's actual metering rules, since browser measurements and billed traffic may differ.
- Retry factor: use total transferred traffic divided by successful baseline-flow traffic from a pilot run. The worked example below assumes 1.2 and 1.15; these are illustrative inputs, not expected performance.
Worked example: a mixed monthly budget
A marketing team runs two jobs.
Job A: mobile landing-page QA — 400 flows per day across eight countries; two redirects and a final page average 3.5 decimal MB per flow. At an assumed retry factor of 1.2: 400 × 3.5 × 1.2 × 30 ÷ 1000 = 50.4 decimal GB per month.
Job B: public business listings — 6,000 HTML-only pages per day average 0.18 decimal MB per page. At an assumed retry factor of 1.15: 6,000 × 0.18 × 1.15 × 30 ÷ 1000 = 37.26 decimal GB per month.
Total = 87.66 decimal GB, or about 87.7 GB. Only the 50.4 GB carrier-specific job requires a mobile pool in this example; use the actual rates of each selected plan to estimate cost.
Check your budget after the first week
Estimates drift. After seven days, compare:
- Planned vs actual billed GB per job. Investigate material differences by checking retries, resource selection, provider metering and changes in page size.
- GB per successful result. Divide traffic by the number of valid results. If it grows week over week, look at retry and restart rates first.
Four ways to keep mobile traffic small
- Load only what you check. For ad verification you may need the final URL and a screenshot, not every script and video on the page.
- Stop following redirects you don't need. Capture the redirect chain from headers instead of rendering each intermediate page.
- Use a risk-based sample where appropriate. A smaller sample reduces coverage as well as traffic, so record what was checked and what remains untested.
- Keep mobile for carrier-specific targets only. Re-test residential every month: if results match for a target, move it back.
Choose providers against the required task
NSOCKS provides residential and static proxy services, including unlimited-traffic plans. Compare the available locations, connection behaviour and billing model with your measured task. If a project also needs mobile carrier exits, evaluate a provider that explicitly offers them; do not infer mobile availability from a residential or static-proxy offering.
Summary
- Residential is the cost-efficient default for most web data tasks.
- Use mobile exits when carrier-network results matter, with separate device testing when the actual handset experience matters.
- Estimate multi-step jobs per session: sessions × MB per session × retry factor × days.
- Recheck the budget after a week and move targets between pools based on measured results.









